How To Execute Home Security Camera Installation: Full Guide

Home surveillance is one of the best ways to keep an eye on your home when out. It not only helps you to identify potential intruders but also plays a major role in collecting evidence. When your home has cameras, you can enjoy peace of mind since you can remotely view when needed. We will discuss everything in this article to help you with home security camera installation.

Part 1. Determine the Home Security Camera Indoor and Outdoor Installation Location

To help you install cameras and enhance home security, let's discuss where to do that indoors and outdoors:

Recommended Locations for Installing an Outdoor Camera

While installing an outdoor camera, here are the recommended locations:

1. Gate: Install at 1.8-2.2 meters height with a 15° downward angle after enabling anti-glare and optimizing low-light performance.

2. Garage: Position the camera at a 45° tilt towards the driveway but higher than 2.5 meters, with a protective shield for rain and activated night vision.

3. Backdoor: Mount higher than 2.5 meters at an angle, with alerting the motion detection and activating night vision.

4. Balcony: Cameras that are higher than 2.5 meters are used to cover a broad angle and provide smart alerts after any unusual activity.

5. Corner of the Wall: Utilize a wide-angle camera with tilting capabilities to cover blind spots and ensure availability of a privacy mask feature.

Recommended Locations for Installing an Indoor Camera

While ensuring surveillance cameras for home installation indoors, try the following locations while avoiding high-privacy areas like the bedroom:

1. Corner of the Living Room: Install a camera high up to ensure a wide and undisturbed view by enabling two-way audio and privacy zones.

2. Entrance Hall: Position high and aim at the shoe cabinet by activating motion recording and smart alerts.

3. Staircase: Install at a high elevation point to cover a broad area, ensuring you capture audio clearly and receive notifications for unusual sounds.

4. Living Room: Mount diagonally to cover the whole view and enable object detection for people and pets, as well as cloud storage for recordings.

5. Children’s Room: Install it above the door, but avoid direct exposure to the bed while maintaining privacy and a do-not-disturb mode.

Part 2. Choose the Right Home Security Camera

When it comes to home security cameras and installation, you need to make the right choice. To pick the best option, you can consider the following aspects:

Recommended Camera Brands (2025 Picks)

If you have no idea which camera to choose, here are the recommended brands of security cameras according to your budget:

1. Wyze Cam v3: This is an award-winning option when you have a minimum budget but need a compact and affordable product.

2. Reolink RLC-811A: For an option in mid-range, when you need a camera with 4K quality and AI detection, then Reolink is the perfect choice.

3. Arlo Pro 5S: To access a premium option that offers features like 2K HDR video and color night vision, then Arlo Pro 5S is the best choice.

4. eufyCam 3C: eufyCam 3C is a great choice for local storage enthusiasts since it offers encrypted storage with no monthly fee for recording.

Part 3. Home Video Surveillance Installation Tutorial: Step-by-Step

The following detailed step-by-step tutorial will help you in installing security cameras inside your home:

Step 1: Preparation

Identify camera coverage and Wi-Fi signal strength

Locate nearby power outlets (wireless: use 10m extension; wired: prefer PoE)

Drill, screwdriver, expansion screws

Mounting bracket or nails

Ethernet cables for NVR systems

Ladder for outdoor installation

Avoid direct sunlight; use a sunshade if needed

Keep at least 3cm distance from wall for heat dissipation

Avoid obstacles (e.g., tree branches, AC units) to reduce false alarms

Step 2: Mount the Camera

Mount bracket to wall/ceiling with screws

For concrete, drill holes and insert expansion anchors

Screw camera onto bracket and adjust angle

Plug in power (if not battery-powered)

Connect Ethernet cable to router or NVR

Conceal wiring if possible for better safety and aesthetics

Step 3: Network Setup

Download the camera brand’s app and scan the QR code

Connect to Wi-Fi (preferably 2.4GHz) or use Ethernet

Log in, bind device, update default password, enable security options

Step 4: Test & Optimize

Check live video quality, night vision, and viewing angle

Enable motion or area detection; set up alerts via app/email

Fine-tune angle and sensitivity to avoid false alarms (e.g., pets, sunlight)

Part 4. Improve Home Security Camera Video Quality Improvement With VikPea

After picking the right camera and tips, suppose you recorded a video with home security surveillance systems, but unfortunately, it came out pixelated and grainy. To help with this, many upscaling tools like HitPaw VikPea (formerly HitPaw Video Enhancer) are available to enhance the unclear motion video. Additionally, it allows you to batch process all your videos in one go to save manual hassle.

Key Features

1. Its Video Quality Repair Model will remove any artifacts from your home security camera video to improve quality.

2. One can use the Detail Recovery Model to restore originality from pixelated, low-resolution camera video.

3. Use the General Denoise Model to remove any noise while maintaining the fine details of security camera videos.

4. You can use the Low Light Enhancement Model, as it will enhance the brightness and contrast of security camera videos.

5. Its Face Model will repair all blurred faces captured in home security camera videos, making them more transparent.

How To Enhance Home Security Camera Footage With VikPea

The following steps elaborate on how to enhance home security cameras with installation footage using HitPaw VikPea:

After accessing the platform, hit the “Video Enhancer” button on the left side, and press the “Import” button to add your video.

Toggle on the “General Denoise Model” and “Video Recovery Repair Model” after importing your video. Later on, press the “Preview” button to analyze how the tool has improved your camera footage.

After previewing the Before/After result, hit the “Export” button to get the enhanced video saved in File Explorer.

Part 5. FAQs on Surveillance Cameras for Home Installation

Conclusion

To conclude, this article discussed how to execute a home security camera installation perfectly. It also discussed a tool, HitPaw VikPea, that can help you improve a security camera’s footage to identify suspects. With HitPaw VikPea, a user can remove all types of denoise with a single click. No need to learn any advanced tools now, because with its AI feature, you can deblur your clips with ease.